Hubbell Locking Inlet: Plug, Industrial, Non-Nema, 480V, Black

Hubbell Wiring Device-Kellems - Locking Inlet: Plug, Industrial

Hubbell Wiring Device-Kellems Locking Devices, Twist-Lock

Locking Devices, Twist-Lock®, Industrial, Flanged Inlet, 20A 3

Hubbell HBL26W76 20 Amp 480 Volt 3-Pole 4-Wire NEMA L16-20P

Walker Wiremold 3.5 Blanking Plate Stainless Steel Qty 10 1046S

This is a replacement for the female connector in a 50A 125/250V shore power cordset.Connectors are susceptible to damage from overheating due to a loose, pitted, or corroded connection, or a damaged power cord. Heat damage is most often indicated by a brown discoloration at the base of the inlet blades or around the sockets in the connector. Damaged shore power components are a potential fire hazard and should be replaced immediately.

Hubbell Nickel Plated Brass Heat-Resistant Connector Body, 50A

Hubbell Twist Lock Connectors

Hubbell Wiring Device-Kellems | Twist-Lock Locking Inlet: Plug, Industrial, Non-NEMA, 480V, Black & White | Part #: CS8165C

It has 4 poles and 5 wires.It is made of nylon material. It has 3 phases. This has a grade of industrial. Standards include: FED SPEC UL/CSA.

Hubbell Wiring HBL2821

Hubbell HBL2521 Locking Plug, 20 amp, 277/480V, L22-20P, Black and

Hubbell Isolated Ground Single Receptacle Twist-Lock Ig2620a

This black/white locking connector from Hubbell Wiring Device-Kellems is a great choice to prevent accidental power interruptions. This locking connector has a Non-NEMA configuration with a voltage of 480Vac and an amperage of 50. It has 3 poles and 4 wires. It has 3 phases. This has a grade of industrial/commercial. It is made of super tough nylon material. Standards.

Hubbell CS8164C Locking Connector -3P4W050A480V