By A Mystery Man Writer
TOGGLER ALLIGATOR solid-wall anchors are the only anchors that extrude to the entire length of a screw. AF8 Toggler Alligator solid-wall anchors are designed to work with a 5/16 drill bit. The tensile strength has been rated at 3,083 lbs. in 4,000 psi concrete and 85 lbs. in 1/2 drywall.
Toggler AF8 Alligator Anchors
Generic Toggler Alligator AF8 Flanged Anchor with Screws, Polypropylene, Made in US, for #8 to #14 Fastener Sizes (Pack of 6)
MECHANICAL PLASTICS CORP Toggler Alligator 6-Pack 3/16-Inch Solid
TOGGLER ALLIGATOR AF8-20 8MM AND SCREWS 20PCS
Paulin Toggler Alligator AF5 5/16-inch All Purpose Concrete
Completely solid anchor with circular cross-section. Causes all forces from mating screw to be fully transmitted to the wall of the hole. Provides full compressive holding over entire length of screw. Flanged for use where a cavity is anticipated (drywall, hollow brick, etc.). Can be more closely spaced than other solid-wall anchors. Fins prevents spinning and countersink even when using a screw gun. Anchor bonds screw to concrete, brick and stone, sealing the hole against moisture.
Mechanical Plastics 50500 0.31 in. Toggler Alligator AF8 Flanged Solid Wall Anchors
Toggler Alligator Anchor - Thread Source
Alligator Anchors, Concrete Wall Anchors
Toggler 1/4 Alligator Anchor W/ Flange AF6 (100/Box)
TOGGLER ALLIGATOR AF8 Flanged Anchor, Polypropylene, Made in US
TOGGLER ALLIGATOR AF8 Flanged Anchor, Polypropylene, Made in US
Alligatorplugg af8 inkl skruv Med krage 6st
5/16 x 1-1/2 Poly-Propylene Plastic Alligator Wall Anchors
TWO Toggler 20-Pack Wall Anchors AF8 Alligator 5/16 Concrete +
Toggler Alligator A10 - Träbolaget i Ljungbyhed