Underground Fire Line Installation for Commercial Buildings
Whether you need fire sprinkler line installation for a new building or a larger service for an upgrade, your sprinkler system is only as good as the fire service line that feeds it. As a fire line contractor, we tap the main with a tee or tapping tee, install the valve, run ductile iron pipe to your building, core the wall and pressure test the line, coordinating with your sprinkler contractor, WSSC Water or the local utility along the way.
Contact us today to review your plans and get a quote for fire service line installation.
Our fire line installation services include:
- Fire line tap with a tee or tapping tee and valve
- Underground fire line in ductile iron pipe
- Wall coring and connection at the building
- Hydrostatic test, backfill and asphalt restoration
Contact Us for Fire Line Installation in and Around Howard County, MD
Have sprinkler plans, a utility approval or a deadline to open? Contact us today and an experienced technician will review your project and give you a clear fire line installation proposal.
Services
Fire Line Tap and Valve Connection
We connect to the water main with a cut-in tee or a tapping tee and valve, set the control valve and coordinate inspections with the utility, so your fire service line starts from a sound connection.
Why the connection matters:
- Utility standards are met the first time
- A control valve lets the line be isolated
- Live taps can avoid shutdowns for neighbors
Underground Fire Line and Fire Service Main Installation
We excavate the trench, lay the underground fire line in ductile iron pipe with restrained joints or thrust blocks, and keep the line at a depth that protects it from freezing.
Why proper installation matters:
- Ductile iron pipe handles fire flow pressures
- Restraint keeps joints from separating
- Correct depth prevents freeze damage
Wall Coring and Building Connection
We core through foundation walls, including thick masonry, and bring the line into the building where your sprinkler contractor connects the riser and backflow preventer.
What we coordinate:
- Entry location with your sprinkler contractor
- Backflow preventer requirements with the utility
- A watertight seal at the wall
Hydrostatic Testing and Restoration
Before the line goes into service, we perform a hydrostatic test to NFPA 24, typically 200 psi for two hours, support flushing, backfill and compact the trench, and complete asphalt restoration.
What you can expect:
- A tested line ready for the sprinkler system
- Documentation for the fire marshal
- A clean, restored site
Frequently Asked Questions
A fire service line is a dedicated pipe that carries water from the public main to a building's sprinkler system or private hydrants, separate from the domestic water service.
